Connect 3/4" hose to FAT SAC Ballast bags for permanently integrated ballast systems.
Use the FAT SAC 3/4" Hose / Sac Thread Adapter for permanent integrated ballast connections. Securely connects 3/4" hose via a barbed fitting directly to the threaded ports built into all FAT SAC Pro X Series ballast bags.
If you plan on removing your bags regularly for cleaning and storage, or if you need a 90 degree fitting for limited clearance, you'll probably want to consider the Flow-Rite 3/4" Quick Connect fitting system instead, but otherwise this less expensive barbed fitting will work just fine if you don't remove your boats from the boat regularly.
- FAT SAC Original Part
- 3/4" Barbed end - Sac valve threads
- Should be screwed into Fat Sac with all-purpose pvc cement
THE RULES OF FAT SACS:
Rule 1: The Bigger the Wake the Bigger the Fun!
Rule 2: As you add more Fat Sacs, keep the weight distributed 60%-70% in the rear of the boat and 30%-40% in the front of the boat
Rule 3: For Runabouts (I/O's) with open bows, add a Fat Sac to the center locker first, then as you gain more experience wakeboarding and desire a bigger wake, distribute additional Fat Sacs using Rule #2.
Rule 4: To switch to wakesurfing, get some MORE Fat Sacs and add them to the rear and side of the boat all the way up to the front (on the side that you are wakesurfing on)