The Fly High Pro X Series Fat Seat Sac is designed to add a massive amount of weight to direct drive boats that have a removable rear seat.
The Fly High Pro X Series Fat Seat Sac is designed for inboard boats that have a removable rear seat. The Fat Seat is huge and it’s strong enough to sit and walk on. It has two arms that extend forward on either side of the engine compartment to add even more weight to the stern of the boat.
Unlike the more versatile, but smaller Rear Seat Sac, the Fat Seat is designed for one location in direct drive boats, but it does deliver over a 1000 lbs. of wake shaping ballast. Remember that it's important to weight the boat evenly to maintain proper handling and to get the best wake, so you'll definitely need to add some ballast to the front of the boat if you're going to use the Fat Seat Sac.
- Single Layer Vinyl Construction
- Unmatches Strength and Durability
- 2 Fill/Vent Ports
- 1 Drain Port
- Made in the USA
BALLAST: 1525lbs / 690kg
SIZE: Body: 26" x 63" x 13" / 66 x 160 x 33cm
Arms: 58" x 13" x 13" / 147 x 33 x 33cm
Beste Lösung für Mittelmotor-Boote, perfektes und massives Gewicht to "Fly High".
THE RULES OF FAT SACS:
Rule 1: The Bigger the Wake the Bigger the Fun!
Rule 2: As you add more Fat Sacs, keep the weight distributed 60%-70% in the rear of the boat and 30%-40% in the front of the boat
Rule 3: For Runabouts (I/O's) with open bows, add a Fat Sac to the center locker first, then as you gain more experience wakeboarding and desire a bigger wake, distribute additional Fat Sacs using Rule #2.
Rule 4: To switch to wakesurfing, get some MORE Fat Sacs and add them to the rear and side of the boat all the way up to the front (on the side that you are wakesurfing on).